I3C Cafe - Now Brewing: A New Digital Protocol

Bosch BMI263 IMU Supports I3C But Is Nowhere To Be Found

Published on Jan 16, 2022

Bosch Sensortec released the BMI263, a 6-Axis IMU, their first I3C compatible device, well over a year ago. They are keen to point out support for I3C all over their product page and marketing materials for the device, unlike some who are somewhat silently adding supporting for I3C. However, I have not yet been able to find any distributor from which the device can be purchased. 

The following text is an exerpt from the "Sensor Features" section of their product brief[pdf]:

"BMI261 is Bosch Sensortec's first IMU that is compliant with the latest I3CSM standard as defined by MIPI Alliance. BMI263 features MIPI I3CSM serial interface with two signal lines (Data SDA & Clock SDC), improving upon features, performance and power use of I2C while maintaining backwards compatibility. MIPI I3CSM serial interface reduces wiring complexity, pin count and signal paths, offering high-speed data transfer at very low power levels compared to the traditional I2C or SPI interfaces.

There is an AppNote from the folks at NXP which demonstrates the I3C functionality in their RT500 and RT600 series microcontrollers using the BMI263 as one of the I3C Target devices, and even includes a photo of the device on a breadboard-friendly eval board, shown in the image to the right of this text. Beyond this, it cannot be found anywhere, not even as a non-stocked item from the common electronics components distributors. I'd absolutely love to know the story behind this one.

Already working with I3C? Check out our I3C Basic Protocol Analyzer Plugin for Saleae Logic...

Read More from I3C Cafe...

Renesas Announces I3C Intelligent Switch Devices

Renesas Announces I3C Intelligent Switch Devices

Published on May 31, 2022

The result of a close collaboration with Intel, Renesas unveils a family of 2:4 and 2:8 I3C Intelligent Switches to greatly improve scalability of I3C on next-gen servers and infrastructure equipment.

MIPI Alliance to Host First I3C Interop Workshop Open to Non-Members

MIPI Alliance to Host First I3C Interop Workshop Open to Non-Members

Published on May 14, 2022

The MIPI Alliance will be hosting the next I3C Interop Workshop on 13-14 June in Munich, Germany. This workshop will be open to non-members for the first time!

Renesas Releases an RF VGA with I3C Control Interface

Renesas Releases an RF VGA with I3C Control Interface

Published on Apr 30, 2022

The Renesas F0443 is a Dual Matched Broadband RF digital variable gain amplifier designed for use in diversity/MIMO receivers. This is quite a deviation from the typical applications of I3C-capable devices.

MIPI® and I3C® are registered trademarks owned by MIPI Alliance. I3C BasicSM, Debug for I3CSM, I3C HCISM and DisCo for I3CSM are service marks of MIPI Alliance. I3C Cafe is an independent publication (blog) and is not affiliated with nor sponsored or endorsed by the MIPI Alliance. Saleae® and Saleae Logic® are registered trademarks owned by Saleae Inc.