The mikroBUS Adapter Board is a perfect complement to both Supernova and Pulsar host adapters, making it easy to interface with 1700+ Click boards™ from MikroE.
Our mikroBUS Adapter Board design breaks out all 18 pins to headers and allows for devices to be communicated with over I3C, I2C, SPI, and UART. GPIO pins are also available as needed.
I2C/I3C bus is available on QWIIC-compatible connectors. I2C, SPI, UART, and GPIO signals are made available via the 2x15 IDC connector. Pulsar & Supernova host adapters include the ribbon cable needed to make this connection. Each mikroBUS adapter board also comes with an additional 20mm long ribbon cable and qwiic-to-qwiic cable to facilitate daisy-chaining up to 4 boards at a time.
Using multiple SPI devices at the same time is achievable by adjusting the DIP switch to correctly assign the desired INT and CS pins for each SPI Target device.
The following boards featuring I3C devices are available from MikroE:
- Bosch Sensortec BMI323: 6DOF IMU 20 Click
- Bosch Sensortec BMP581: Pressure 21 Click
- Bosch Sensortec BMP585: Barometer 13 Click
- TDK ICM-42688PO: 6DOF IMU 14 Click
- TDK ICM-42670-P: 6DOF IMU 22 Click
- ST Microelectronics TSC1641: Current 12 Click
- ST Microelectronics LPS27HHW: Pressure 15 Click
Please note that the silkscreen has been updated for improved clarity and conformance with the mikroBUS socket labeling guidelines.
