// mission control 3
The embedded development ecosystem.
Actively drive your hardware over I²C, SPI, I3C, and GPIO, and program EEPROM and Flash memory, all from one professional environment, in your browser or native on Windows, macOS, and Linux.
// capabilities
One tool to replace the rack.
Stop stitching together a dozen vendor utilities. Mission Control 3 brings your I²C, SPI, I3C, and GPIO operations and memory programming into a single professional environment.
// protocols
Multi-protocol operations.
Actively read and write over I²C, SPI, I3C, and GPIO, all from one window.
// i3c
Industry-leading I3C.
HDR modes to 12.5 MHz, In-Band Interrupts, Hot-Join, and dynamic addressing.
// memory
Memory programmer.
A visual hex editor for I²C and SPI EEPROM and Flash: read, write, verify, blank-check, and erase.
// no-code
No-code, point and click.
Compose a transaction and run it, then chain a whole sequence, without writing a line of code.
// see it in action
Drive the bus without writing code.
Mission Control 3 turns bus work into point-and-click. Compose a transaction and run it, then chain a whole sequence and fire it in one go.
// point and click
Run a transaction with a click.
Compose an I²C read or write in the GUI and send it straight to your device.
// sequences
Chain them into a sequence.
Line up a series of transactions and run them together, repeatable and ready to replay whenever you need them.
// memory programming
Program EEPROM and SPI FLASH memories with ease.
Mission Control 3’s Memory Programmer reads and writes I²C EEPROMs and SPI flash with a visual hex editor, per-chip presets, read / write / verify / blank-check / erase, and binary file load and save, all from the same window as your transactions.
// every os
macOS included.
Runs natively on Windows, macOS, and Linux, and straight from the browser. No platform left out.
// in your browser
Or no install at all.
Program straight from a browser tab. Nothing to download, nothing to install, on any machine.
// try it now
Test drive it today.
Launch a simulated device in the web app and read, write, and verify right now, before your hardware even arrives.
// works with
Built for Binho hardware.
Mission Control 3 drives every Binho USB host adapter, one workbench across the whole lineup.
Binho Pulsar
Multi-Protocol Host Adapter
Protocols
Software
Binho Supernova
I3C-Capable Host Adapter
Protocols
Software
// in your browser
Run it in your browser.
No install, no sign-up. Open a tab, connect your hardware, and use the full Mission Control 3 workbench right away.
Launch the web app// download
Get the desktop app.
Native builds for Windows, macOS, and Linux. Same workbench, native performance on every OS.
// preview release
Mission Control 3 2026.6.0
The next-generation workbench for embedded systems.
// faq
Common questions.
I already own a Supernova or Pulsar. Will it work with Mission Control 3?
Yes. Just make sure your device is on the latest firmware, which you can update in a couple of clicks from Mission Control 2.17.3. Once the firmware is current, your Supernova or Pulsar is ready to use with Mission Control 3.
What is meant by Public Preview?
We rebuilt Mission Control 3 from the ground up, and it has reached the maturity where it is creating ample value for all of our customers. The features in the Public Preview are only a fraction of what we have built so far, and we intend to release additional features roughly every two weeks as we complete verification testing on each one. The official release of Mission Control 3 is targeted for September / October 2026.
// newsletter
Get Mission Control updates
New releases, features, and tips for getting the most out of Mission Control. No spam, unsubscribe anytime.
Try Mission Control 3 in your browser.
No install, no sign-up. Open a tab and connect your hardware.