Solve your toughest
embedded challenges.
Purpose-built tools and the expertise to back them, from bench to production.
// featured solutions
What we do best.
Two areas where our tools stand alone: the industry's deepest MIPI I3C stack, and a new generation of hardware built for AI-driven development.
MIPI I3C Integration & Testing
Protocol analyzers, USB host adapters, and expert I3C consulting, trusted by 200+ teams and backed by MIPI Alliance membership since 2023.
Explore I3C solutions> identify the I3C target▋
AI-Native & Agentic Development
A clean, scriptable path for any coding agent to drive I2C, SPI, and I3C on live silicon, from a quick autocomplete to fully autonomous bring-up.
See AI-native development// over I3C
JESD300-5 SPD
The DDR5 SPD5 Hub sideband: SPD, temp sensor, and PMIC.
MCTP over I3C
Platform management on I3C: NVMe-MI, SPDM, and PLDM.
NVMe-MI over I3C
NVMe SSD sideband management, over the I3C bus.
I/Os over I3C Bridge
The emerging MIPI bridge: I²C, SPI, UART, and GPIO on one I3C link.
Debug over I3C
MIPI two-wire debug and trace, over the functional I3C bus.
CMIS over I3C
OIF's publicly announced I3C interface option for CMIS module management.
// solutions
Plug in. Get to work.
From conformance testing to flash programming and hardware-in-the-loop, our tools handle the whole range directly. No bespoke rig to build, no setup to maintain, just connect to your target and go.
Develop
Bring up boards, drive sensors, and write the firmware that talks to them.
Device Driver Development
Write and debug drivers against real silicon, driving any bus from Python or C.
Sensor Bring-up & Evaluation
Power a sensor, assign its address, and read its registers in minutes.
Analyze & Verify
See what is on the bus, prove it meets spec, and keep it that way.
Protocol Analysis & Debugging
Capture and decode live bus traffic to find the glitch fast, with deep MIPI I3C decode.
Conformance Testing
Exercise your devices against the MIPI I3C spec and catch issues before production.
Protocols
Program
Write firmware and memory, on the bench or down the production line.
// USB Adapters
Interface with embedded systems.
Talk to any I²C, SPI, or I3C device straight from your laptop. Plug in over USB and drive the bus from a GUI, Python, or C in seconds.
// I²C
USB-to-I²C adapter
Scan the bus, read and write registers, and program EEPROM, from a GUI, Python, or C.
// SPI
USB-to-SPI adapter
Full-duplex transfers, SPI-flash programming, and up to four chip-selects at 50 MHz.
// I3C
USB-to-I3C adapter
Controller or target, with IBI and Hot-Join, on mixed I²C and I3C buses.
Need a
custom solution?
Whether you need help selecting the right tools or have a unique testing challenge — we're here to help.